What is the purpose of invisible thread? (Sewing Machine, Quilting) Update 05/2022

It isn’t only for stitching. Magicians have employed invisible thread to assist them execute their acts for generations. It is a thread that can assist sewers improve the strength and appearance of their quilts.

What is the purpose of invisible thread? Another technique that sewers can use to improve their sewing tasks is invisible thread. Because it is impossible to obtain a thread color that matches all of the colors used in quilting, invisible thread is commonly utilized.

Continue reading this post to learn everything there is to know about invisible thread. It digs deep to learn everything there is to know about invisible thread. Despite popular belief, the invisible thread performs admirably when summoned.

What is Invisible Sewing Thread

There are various names for invisible thread. It’s also known as monofilament thread or clear thread. Because the thread is sometimes colorless, it is given these names. It could also be a gloomy gray tint that helps hide it.

What is Invisible Thread Used For? (Quilting, Sewing Machine)

Other colors of the thread are available, and those hues help hide stitches. Using a name brand of invisible thread is the key to success. Make no attempt to save a few pennies.

YLI, Superior Threads, Sulky, and Madeira should be the name brands. Anything other and you risk getting a subpar invisible thread that can turn brown and destroy your sewing effort. This thread did something similar approximately 40 years ago.

On low heat, iron food invisible thread. This should eliminate any melting concerns associated with this thread type.

What is Invisible Thread Used For

The topstitching method is one area where invisible thread is used. You can’t keep the thread from revealing its full splendor in this approach. You may not want that circumstance to occur, thus using invisible thread is a good idea.

Quilting is another sewing project where invisible thread comes in helpful. Because a quilt has so many colors, it’s impossible to disguise the thread and stitches utilized.

You can disguise both using invisible thread and focus on your end product’s design and quality. Most people do not want to see their thread stick out like a sore thumb unless they have employed a particularly inventive stitch that has done an excellent job of holding their quilt together.

The invisible thread comes to the rescue, directing attention to your results rather than your process.

What is Invisible Thread Made Of?

To begin with, there aren’t many strands in invisible thread. Monofilament gets its name from the word mono, which means “one” or “single.” To make it invisible, you simply need one strand of thread.

The most common thread used as an invisible thread is clear nylon. Nylon is incredibly durable and has a lot of strength. Some individuals are concerned that high temperatures will melt the nylon, but no substantial evidence has appeared to support this assertion.

To avoid this problem, use low heat when washing, drying, or ironing clothing pieces made with nylon invisible thread. Polyester is preferred by others. This thread appears to be more heat resistant than nylon.

Additionally, polyester is a robust thread that should withstand normal wear and tear rather well.

Is Invisible Thread Strong?

This is a yes-or-no situation. Yes, both nylon and polyester threads are quite robust. They stand up well in a variety of harsh environments. Even if such threads aren’t used as invisible threads, nylon and polyester can withstand the elements and perform admirably.

However, invisible thread is also exceedingly brittle in the sense that it breaks readily. The reason for this is that if the thread didn’t break quickly, it would slash through your fabric like a hot knife through butter.

Finding a decent brand of invisible thread that is soft and supple is the key to success. You also don’t want it to turn yellow on you, so pick a good brand. The breaking issue should be much reduced if the thread feels soft and supple in your hands.

Can Invisible Thread be Ironed?

Yes, you can iron invisible thread for the most part. There is some risk that nylon will melt if it comes into touch with an iron, but this should be avoided if you take the proper precautions.

Some sewers use polyester invisible thread because of this difficulty. Polyester appears to be superior at withstanding high temperatures and ironing. You may avoid any problems and keep your invisible thread in good repair by using low heat on your iron.

Your choice of invisible thread is entirely up to you. If you’re forgetful and forget what type of fabric you used in your quilt, etc., keep your iron temperature low at all times.

Just be careful when ironing because too much heat can cause harm if the temperature is set too high.

A Guide to Using Monofilament Thread - WeAllSew

Does Invisible Thread Melt?

When many women and men think of invisible thread, they believe this notion. When nylon thread was first introduced to the sewing world many decades ago, the myth began. The thread quality was not very excellent back then.

Because the nylon thread’s poor quality yellowed, broke, and melted, it’s easy to see why many people still think of it that way. However, times and production standards evolve, and today’s invisible threads do not melt.

A monofilament thread’s melting point is expected to be higher than that of fabric. If your thread melts, your clothing item will be ruined because the heat will severely harm it.

This means that you can iron, use hot water in your washing machine, and use higher heat in your dryer without your invisible thread melting or being harmed.

We say should since we can’t vouch for off-brands who may continue the ancient custom of using inferior nylon and other materials to create their invisible thread.

Can Invisible Thread be Used in a Sewing Machine?

Yes, but you’ll need to make a few changes to have the thread run through your machine more smoothly. The first thing you should do is change your top tension. The rationale for this has already been stated.

Good invisible thread is readily broken. You’d probably have a hard time finishing your sewing project if it didn’t. Your fabric would be ripped apart by the thread.

When adjusting the tension, make it a little looser than usual. Then, to see if the thread breaks, etc., perform several test stitches. It will be a trial and error process as varied sewing circumstances may cause you to loosen or tighten the tension until you find the appropriate amount.

When using invisible thread in a sewing machine, patience is required.

Can You Put Invisible Thread in The Bobbin?

The invisible thread can be wound into a bobbin. You should wind it slowly so you don’t have any problems afterwards. This process is not for everyone who sews because it might be a bit finicky.

One technique is to loosen the bobbin tension slightly to ensure that your project is not interrupted by thread breakage. Another solution is to purchase a separate bobbin casing and use it exclusively for your invisible thread.

You won’t have to adjust your bobbin tension as often this way. The change may slow down your sewing and make it more difficult and stressful to complete.

So take the necessary steps to alleviate the difficulties and aggravation by purchasing a new bobbin casing. Some more experienced sewers will just use normal thread in their bobbins instead.

How to Use Invisible Thread in Sewing Machine

When it comes to using invisible thread with your sewing machine, we’ve previously covered the basics. Following that advice should make using that thread much simpler.

The needle is the third crucial component in employing invisible thread in your sewing machine. When utilizing invisible thread in your machine, the smallest needle possible is recommended.

If the needle is difficult to thread, simply color the end of the invisible thread with a marker until it passes through the eye. You can always snip that mark off once you’ve threaded the needle successfully.

Make sure to lock the stitches at the beginning and end of your seams to avoid snarls. Then pay attention to your thread path. At the top of your machine, the invisible thread has a tendency to tangle.

If this happens, use a safety pin to secure it to the machine’s side. Then, instead of going via your sewing machine’s built-in thread path, reroute the thread through the safety pin.

How do You Hide Thread When Sewing

When utilizing invisible thread, you can choose from a variety of colors. Many sewers use clear invisible thread because it is difficult to discern on light-colored fabrics.

However, when using darker colors, the clear invisible thread in shaded or toned materials may become visible. It will show up and spoil the appearance of your garment or quilt. Use a smokey color invisible thread to get around this issue.

Some of the better products provide a lovely smoky color that blends in with darker hues. Others simply create a dark smokey color that seems solid rather than tinted.

Bring a sample of the color or colors you’ll be using in your sewing project to the thread store and place some invisible thread on it to see which one works best for you. Check it out before you buy it.

What Needle do You Use for Invisible Thread

In this area of sewing, you may have some options. You could use some top stitching needles. You can also use a microtex sharp needle in 70/10 or 65/9. Some sewers have had success with those measurements.

However, according to the specialists we consulted, you should use the smallest needle feasible. The reason for this is that when monofilament invisible thread passes through the holes left by the needle, it does not relax.

Keep in mind that invisible thread is a very delicate thread that only employs one strand of fabric. When it comes to filling needle holes, this makes the thread exceedingly tiny and stiff.

If your vision is poor, a magnifying glass can be used to magnify the needle eye and make it easier to view. Alternatively, color the thread end to ensure that it will easily pass through the eye.

How to Knot Invisible Thread

If you or your husband are skilled at tying fly fishing flies, knotting invisible thread should be simple. The knots in both techniques are made with nylon. Here’s how to tie an invisible thread knot:

To begin, thread around 12 inches of thread into the needle’s eye.

Second, keep the needle in your right hand and the thread in your left.

Third, make a loop in the middle of the thread with your left hand and hold it there.

Fourth, make a second loop with the bottom of the thread. This should automatically repeat the first loop.

Finally, connect the thread’s end over the fold and tighten the needle. This should result in a knot.

Knotting your invisible thread can be done in a variety of ways. A little research may lead you to one that is more convenient for you.

How to Use Invisible Thread for Quilting

When you begin your quilting project, the first thing you must do is decide which invisible thread you will use. Nylon is an option, but because it is stiffer than polyester, it can be more difficult to work with.

If you’re using a sewing machine, you’ll need to wind the bobbin once you’ve made your decision. Hand-wind it, but do not pull the thread taut or stretch it as you wind it.

Six Invisible Threads Put To The Test

Don’t forget to pick the proper color for your quilt as well. The options include clear and smoky colors. To hide your stitches across your quilt, you’ll need the correct color. Remember to consider all of the colors you’ll use in your quilt and choose the one that works best.

Additionally, you should use the smallest needle possible, which has already been discussed. Finally, a thread nest can help ensure that the invisible thread unwinds evenly off the spool.

Tips for Using Invisible Thread

Despite its benefits, invisible thread has a bad reputation due to certain negative experiences or misunderstandings about how to use it. Here are some suggestions to make suing more enjoyable for you:

  • Place the thread spool in the vertical position. All sewing machines should be able to use this.
  • You’ll want to see how your computer handles invisible thread by practicing. Practice runs on scrap fabric are a good way to get a feel for how your sewing machine handles this thread.
  • Even for dark colors, the clear invisible thread may be the best of both invisible thread alternatives.
  • Your sewing machine will not be damaged by the invisible thread. Nobody knows where that rumor came from.

Final Thoughts

If you know how to use invisible thread correctly, it can be a huge benefit. It’s a beautiful thread that will help your quilts or other sewing items stand out. To get the best results when utilizing invisible thread, you must forget about the myths you’ve heard and follow the correct advice.

This thread is safe to use in sewing machines as long as the machine is properly adjusted. When using this thread to conceal your sewing, you have nothing to fear.

Leave a Reply

Your email address will not be published.